FUNCTIONAL DELAY TEST QUALITY ASSESSMENT AT HIGH LEVEL OF ABSTRACTION

Authors

  • Eduardas Bareiša Kaunas University of Technology
  • Vacius Jusas Kaunas University of Technology
  • Kęstutis Motiejūnas Kaunas University of Technology
  • Rimantas Šeinauskas Kaunas University of Technology

Abstract

The test can be developed at the functional level of the circuit. Such an approach allows developing the test at the early stages of the design process in parallel with other activities of this process. The main problem is the quality assessment of the functional test because the implementation of the circuit is not available yet. The paper pre-sents the criteria of the quality assessment of the functional test consisting of the pairs of patterns with multiple signal transition. The introduced criteria are based solely on the primary input values and the primary output values of the programming prototype. The use of the indirect impact of the inputs to the outputs in the criteria of the quality assessment is introduced for the first time. The presented experimental results explore the relationship between the value of the presented criterion and the transition fault coverage at the gate level. The increased quality of the functio-nal test means the higher transition fault coverage.

Downloads

Published

2007-03-29

Issue

Section

Articles